Salta al contenuto principale Skip to main navigation Skip to search

MD 610 M40

Prodotto dismesso

Il nuovo modello MD 610 è disponibile con torre rinforzata da 2 45 m tipo K850 e con torre da 2 5 m.

La MD 610 M40 sostituisce la MD 560 B M40. È dotata del nuovo argano 270 LVF ultima generazione di argano a variazione di frequenza che genera prestazioni velocità/carichi molto elevate fino a 162 m /min per un carico di 2 8 t.

È disponibile la funzione Power Control (limitazione di potenza). Tale funzione consente di operare a partire da più livelli differenti di potenza d'ingresso. Grazie a questo sistema l'argano si può utilizzare anche in cantieri dove l'alimentazione elettrica è limitata.
Inoltre la funzione optima consente l'ottimizzazione costante delle velocità in funzione del carico sollevato.

Caratteristiche

  • Caratteristiche

    Reinforced mast: K850 2.45 m or round R 2.5 m

    The frequency variation mechanisms (lift distribution orientation) allow the following circumstances:

    • The regulation and control of the motor can be adapted to the machine's features notably height jib length and the load being hoisted: the behaviour of the crane while in operation is adapted to its configuration.
    • Acceleration and deceleration for the machine and the crane operator are optimized: the crane structure is protected over the long term.
    • Deceleration phases can limit the use of brakes. Brakes can be dropped at zero speed. This protects the crane structure over the long term.
    • The crane operator can interact with the deceleration curves (it is possible to operate against orientation with Optima+). This allows the machine to be adapted to operating habits.
    • The technician can quickly establish detailed diagnostics on the mechanisms thanks to the various menus on the variation panel (reading parameters meters) permitting a simple fast and efficient dialogue between man and machine.
    • Inrush current can be reduced.
    • Consumption can be reduced.

    The MD 610 combines numerous innovations designed to reinforce safety and simplicity during assembly:

    • The auxiliary winch used to ready the counter jib and jib cables considerably reduces assembly time. It also serves to mechanise the arm on the 25 t version.
    • The large platforms and designated access distinctly improve and secure working conditions for lifting personnel.
    • Every crane component is equipped with anchoring points for safe handling.

    The next-generation Ultra View cab meets all the requirements for the crane operator to work safely in a comfortable ergonomic environment.
    Extremely spacious it also provides excellent visibility of the construction site thanks to its 9 m² glass surface.
    It comes with state-of-the-art equipment and a highly functional layout that allows the operator to personalise his space:

    • Auto-regulated climate control upholstery
    • Dialog Visu II indicators (display area showing information to assist in operation: immediate range permitted range height suspended load permitted load time wind haul)
    • Front window wipers side window wipers sun visor
    • Storage table electrical outlets
     

    Key Advantages

    • Fastest winch in its class: 270 hp for a maximum load of 40 t 532 m cable winding capacity
    • Auxiliary winch standard for assembling cables
    • Jib assembly possible in 1 2 or 3 parts. Maximum weight during assembly can be limited to approx. 16 t
    • Comfortable access for assembly and maintenance

Prodotti analoghi

Notizie